Zevolving
  • Home
  • Concepts
  • ABAP 740 – Mesh Path – Forward and Inverse Association

ABAP 740 – Mesh Path – Forward and Inverse Association

By | May 13, 2015 | Concepts | 16,271 | 2

In the mesh structure as of ABAP 740, you can move forward or backward using the association. Lets check out more on them.

Introduction

In the last article, you have seen how to define the MESH and the association. If you have not read that article yet, you need to read it before continuing to understand about mesh. Mesh would have an association – a condition – using which you can access the different tables. There could be forward (default) or inverse association.

Mesh_Path_with_association

Multiple Associations

You can chain the association together. The default association is the forward association. 

 
  DATA(ls_route) =
    t_mesh-order_info\order_to_customer[ t_mesh-order_info[ order = ls_order-order ]
       ]\customer_to_route[  ] .
 

The first association has to have the key to point it into the mesh – something like a starting point. All other subsequent associations can be without the condition.

Note that the mesh node is also accessed with the square bracket sign [ ] as Tabular expression and the old ITAB[] to show the body. The difference here is there has to be space between the brackets. If you don’t have the space, it would give you the error “No Component Exist with the name ..”

Mesh_Path_Access_syntax_error

Forward association

The example in the article shows the forward association. To go forward in the mesh, you need to chain together multiple associations in the mesh path. Like: 

 
  data(ls_result) =
    t_mesh_n-customer_info\customer_to_route[ t_mesh_n-customer_info[ customer = ls_cust_n-customer ]
      ]\route_to_rc[
      ]\rc_to_types [
      ]\types_to_desc[
      ].
 

Here you have multiple forward associations using the association names – customer_to_route > route_to_rc > rc_to_types > types_to_desc .

Inverse Association

The inverse association is to go back one step on the mesh path. To use the inverse association, you need to use it with ^ in front of the association name. Also, you need to specify the node name with the association with connection ~. This specification is required as the source node can be a target node of different association. Like:

 
  DATA(lt_customers) =
    t_mesh-order_info\order_to_customer[ t_mesh-order_info[ order = ls_order-order ]
       ]\customer_to_route[
       ]\^customer_to_route~customer_info[ 
       ].
 

So, in here you are going from order_to_customer > customer_to_route. With ^customer_to_route~customer_info[ ] going back to the customer node, which is the target of the association order_to_customer.

Example 1 – Forward and Inverse association

The association is like customer_to_route > route_to_rc > back to route_info > back to customer_info > customer_to_partner. Visually looks this:

Mesh_Path_with_association_n

 
REPORT ztest_np_mesh.
 
TYPES:
  BEGIN OF ty_customer,
    customer TYPE char10,
    name     TYPE char30,
    city     TYPE char30,
    route    TYPE char10,
  END   OF ty_customer.
TYPES: tt_customers TYPE SORTED TABLE OF ty_customer
          WITH UNIQUE KEY customer.
 
TYPES:
  BEGIN OF ty_orders,
    order    TYPE char10,
    customer TYPE char10,
  END   OF ty_orders.
TYPES: tt_orders TYPE SORTED TABLE OF ty_orders
        WITH UNIQUE KEY order.
 
TYPES:
  BEGIN OF ty_routes,
    route TYPE char10,
    name  TYPE char40,
  END   OF ty_routes.
TYPES: tt_routes TYPE SORTED TABLE OF ty_routes
        WITH UNIQUE KEY route.
 
TYPES:
  BEGIN OF ty_partners,
    customer TYPE char10,
    p_type   TYPE c LENGTH 2,
    partner  TYPE char10,
  END   OF ty_partners.
TYPES: tt_partners TYPE SORTED TABLE OF ty_partners
          WITH UNIQUE KEY customer p_type.
 
*
TYPES:
  BEGIN OF ty_route_config,
    route   TYPE char10,
    c_type  TYPE char10,
    c_value TYPE char40,
  END   OF ty_route_config.
TYPES: tt_route_config TYPE SORTED TABLE OF ty_route_config
          WITH UNIQUE KEY route c_type.
 
TYPES:
  BEGIN OF MESH ty_rep_mesh_n,
    customer_info TYPE tt_customers
  ASSOCIATION customer_to_order TO order_info
           ON customer = customer
  ASSOCIATION customer_to_route TO route_info
           ON route = route
  ASSOCIATION customer_to_partners TO partners
           ON customer = customer,
    partners      TYPE tt_partners
  ASSOCIATION partner_to_names TO customer_info
          ON customer = partner,
    order_info    TYPE tt_orders,
    route_info    TYPE tt_routes
  ASSOCIATION route_to_rc TO route_config
           ON route = route,
    route_config  TYPE tt_route_config,
  END   OF MESH ty_rep_mesh_n.
 
DATA(t_customres) =
  VALUE tt_customers(
    ( customer = 'C0001' name = 'Test Customer 1' city = 'NY' route = 'R0001' )
    ( customer = 'C0002' name = 'Customer 2'      city = 'LA' route = 'R0003' )
    ( customer = 'C0003' name = 'Good Customer 3' city = 'DFW' route = 'R0001' )
    ( customer = 'C0004' name = 'Best Customer 4' city = 'CH' route = 'R0003' )
  ).
 
DATA(t_partners) =
  VALUE tt_partners(
    ( customer = 'C0001' p_type = 'PY' partner = 'P0001' )
    ( customer = 'C0001' p_type = 'SH' partner = 'S0001' )
    ( customer = 'C0002' p_type = 'PY' partner = 'P0002' )
    ( customer = 'C0002' p_type = 'SH' partner = 'S0002' )
    ( customer = 'C0003' p_type = 'PY' partner = 'P0003' )
    ( customer = 'C0004' p_type = 'SH' partner = 'S0004' )
  ).
 
DATA(t_orders) =
  VALUE tt_orders(
    ( order = '90001' customer  = 'C0001' )
    ( order = '90002' customer  = 'C0002' )
    ( order = '90003' customer  = 'C0001' )
    ( order = '90004' customer  = 'C0001' )
    ( order = '90005' customer  = 'C0004' )
    ( order = '90006' customer  = 'C0004' )
    ( order = '90007' customer  = 'C0003' )
  ).
 
DATA(t_routes) =
  VALUE tt_routes(
    ( route = 'R0001' name = 'Route 1' )
    ( route = 'R0002' name = 'Route 2' )
    ( route = 'R0003' name = 'Route 3' )
                    ).
 
DATA(t_rc) =
  VALUE tt_route_config(
    ( route = 'R0001' c_type = 'RTYPE' c_value = 'DSD' )
    ( route = 'R0001' c_type = 'MAX'   c_value = '10'  )
    ( route = 'R0002' c_type = 'RTYPE' c_value = 'WH' )
    ( route = 'R0002' c_type = 'MAX'   c_value = '100'  )
    ( route = 'R0003' c_type = 'RTYPE' c_value = 'WH' )
    ( route = 'R0004' c_type = 'RTYPE' c_value = 'DSD' )
                    ).
 
DATA t_mesh_n TYPE ty_rep_mesh_n.
t_mesh_n-order_info     = t_orders.
t_mesh_n-customer_info  = t_customres.
t_mesh_n-partners       = t_partners.
t_mesh_n-route_info     = t_routes.
t_mesh_n-route_config   = t_rc.
 
 
LOOP AT t_mesh_n-customer_info INTO DATA(ls_cust_n).
  WRITE: / ls_cust_n-customer.
 
  WRITE: / ' Orders'.
  LOOP AT
   t_mesh_n-customer_info\customer_to_order[ t_mesh_n-customer_info[ customer = ls_cust_n-customer ] ]
     INTO DATA(ls_order_n).
    WRITE: / ls_order_n.
  ENDLOOP.
 
 
  TRY .
      DATA(ls_result) =
        t_mesh_n-customer_info\customer_to_route[ t_mesh_n-customer_info[ customer = ls_cust_n-customer ]
          ]\route_to_rc[
          ]\^route_to_rc~route_info[
          ]\^customer_to_route~customer_info[
          ]\customer_to_partners[
          ].
      WRITE: / '  partner', ls_result-partner.
    CATCH cx_sy_itab_line_not_found into data(lo_no_line).
      write: / 'not found', lo_no_line->get_text( ).
  ENDTRY.
 
ENDLOOP.
 

This would generate the output like this:

Mesh_Path_Example_OP

Example 2 – Forward association with condition

Also notice that the first association has the starting point, but rest all of them don’t have any key. You can add the key if you are looking for something very specific. Otherwise, you don’t need to specify the key.

 
  data(ls_route_n) =
    t_mesh_n-customer_infocustomer_to_route[ t_mesh_n-customer_info[ customer = ls_cust_n-customer ]
      ]route_to_rc[ c_type =  'MAX'
      ].
 

With the condition the output is like this

Mesh_Path_output_with_condition

Where as Without the condition the output is like

Mesh_Path_output_wo_condition

Example 3 – Missing data for condition in the association

What happens when there is some data missing in the association? It will stop there and raise the exception that entry is not found, even the entry is there in the follow on tables. Sweet !!

 
DATA(t_rc) =
  VALUE tt_route_config(
    ( route = 'R0001' c_type = 'RTYPE' c_value = 'DSD' )
    ( route = 'R0001' c_type = 'MAX'   c_value = '10'  )
    ( route = 'R0002' c_type = 'RTYPE' c_value = 'WH' )
    ( route = 'R0002' c_type = 'MAX'   c_value = '100'  )
 "   ( route = 'R0003' c_type = 'RTYPE' c_value = 'WH' )
 "   ( route = 'R0004' c_type = 'RTYPE' c_value = 'DSD' )
                    ).
 
 

Output of the same loop with same chained association the main example, would produce this output:

Mesh_Path_output_with_missing_entries

Example 4 – Get all matching values using FOR

This example will get all the orders for customer C0001. Notice the use of FOR here. More on FOR in the next article.

 
DATA(lt_orders) =
 VALUE tt_orders(
    FOR <root> IN t_mesh_n-customer_info WHERE ( customer = 'C0001' )
    FOR <node> IN t_mesh_n-customer_infocustomer_to_order[ <root> ]
     ( <node> )
 ).
 

Table of Content – ABAP 740 Concepts

Like It? Share!!

Don't miss an Update

fb/zevolving @zevolving

Get notified of the new post, right into your inbox

Naimesh Patel{274 articles}

I'm SAP ABAP Consultant for more than a decade. I like to experiment with ABAP especially OO. I have been SDN Top Contributor.
Follow :

Explore all of his 274 articles.

Load comments

2 Comments

  • Steve Oldner
    # May 14th, 2015 at 7:01 am

    Too cool!!! And again I’ll have to wait until we upgrade.

    Thanks Naimesh, but I’ll really be thankful next year…

  • Rajeev
    # July 1st, 2015 at 10:07 am

    Thanks Naimesh.. Very nice post.

    I think you can use this concept in internal table join related operations..

Comments on this Post are now closed. If you have something important to share, you can always contact me.

‹
ABAP 740 – FOR Iteration Expression
›
ABAP 740 – Meshes – A new complex type of Structures
You seem to be new here. Subscribe to stay connected.

Current Poll

Do you like Quality Assurance of your Build/Design?

View Results

Loading ... Loading ...

Search